home *** CD-ROM | disk | FTP | other *** search
- Path: news-m01.ny.us.ibm.net!usenet
- From: visan@ibm.net
- Newsgroups: comp.sys.palmtops,alt.cellular-phone-tech,comp.dcom.modems,comp.dcom.telecom.tech
- Subject: Re: Integrated modem/cell phone (was Re: Cell modem for 200LX?)
- Date: 21 Jan 1996 00:00:00 GMT
- Message-ID: <4drvm0$4ap4@news-s01.ny.us.ibm.net>
- References: <4dh0lk$t60@fcnews.fc.hp.com> <4dop43$nql@newsbf02.news.aol.com> <4dosme$hbm@fcnews.fc.hp.com>
- Reply-To: visan@ibm.net
- NNTP-Posting-Host: slip139-92-41-162.emea.ibm.net
- X-Newsreader: IBM NewsReader/2 v1.2.5
-
- Hi, there!...
-
-
- In <4dosme$hbm@fcnews.fc.hp.com>, diamant@sde.hp.com (John Diamant) writes:
- >Lant7 (lant7@aol.com) wrote:
- >> if used with Cellular features, it is typical to connect the cellphone via
- >> a cable to the same connector serving the landline RJ-11 cable hookup,
-
- When you want a true V.34 cellular connection, you sould buy a AT&T Paradyne
- new KeepInTouch modem, thats allow a direct connection with the ETC protocol,
- the one that brings a good performance over the cellular operation, in a PCMCIA
- modem.
-
- Both, the direct connection, cheapest and technical better that the RJ-11
- adaptors, and the ETC protocol, are a best choice for cellular operation, thanks
- to the Paradyne old Know-How for the best high quality data products
- manufacturer...
-
- Try http:/www.paradyne.att.com
-
- Hope this helps!...
-
- Vicente sanchez. EB4BSQ.
- AKA visan@ibm.net
- SysOp de MERCURIO BBS
-
-